PP H570 resin
PP homopolymer, injection · GS Caltex
PP homopolymer for injection molding. Thien An Plastics supplies H570 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- GS Caltex (GS Caltex PP H570)
- Polymer
- PP – Polypropylene
- Type
- PP homopolymer, injection
- Processing
- Injection molding
What is H570?
PP H570 from GS Caltex is a PP homopolymer, injection, melt flow rate (230 °C/2.16 kg): 25 g/10 min; density: 0.903 g/cm³. H570 is typically used for: injection molded parts. Thien An Plastics (Hanoi, Vietnam) supplies H570 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: GS Caltex PP H570, PP H570, Caltex H570
Applications
- Injection molded parts
Typical properties – H570
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (230 °C/2.16 kg) | 25 | g/10 min |
| Density | 0.903 | g/cm³ |
| Tensile strength at yield | 34.3 | MPa |
| Flexural modulus | 1670 | MPa |
| Notched Izod impact (23 °C) | 26 | J/m |
| Rockwell hardness (R scale) | 103 | |
| Vicat softening point | 152 | °C |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is H570?
H570 (GS Caltex PP H570) is a PP homopolymer, injection produced by GS Caltex, in the Polypropylene (PP) family.
What are the melt flow rate and density of H570?
Melt flow rate (230 °C/2.16 kg): 25 g/10 min; Density: 0.903 g/cm³.
What is H570 used for?
H570 is typically used for: Injection molded parts.
Where can I buy H570 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies H570 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.