
LLDPE F2002S resin
LLDPE (C4) blown film, slip/antiblock · OPaL (ONGC Petro additions)
Butene LLDPE made with Ineos gas-phase technology: good mechanical and very good optical properties, easy processing (per provisional TDS). Thien An Plastics supplies F2002S in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- OPaL (ONGC Petro additions)
- Polymer
- LLDPE – Linear low-density polyethylene
- Origin
- India
- Type
- LLDPE (C4) blown film, slip/antiblock
- Processing
- Blown film
Indicative price: 17,000 – 60,000 VND/kg (varies by grade, lot and timing – contact us for an exact quote)
What is F2002S?
LLDPE F2002S from OPaL (ONGC Petro additions) is a LLDPE (C4) blown film, slip/antiblock, melt index (190 °C/2.16 kg): 2.0 g/10 min; density: 0.920 g/cm³. F2002S is typically used for: general-purpose packaging film, blending with LDPE/LLDPE. Thien An Plastics (Hanoi, Vietnam) supplies F2002S in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: F 2002S, OPaL F2002S, LLDPE F2002S, F2002
Applications
- General-purpose packaging film
- Blending with LDPE/LLDPE
Typical properties – F2002S
| Property | Value | Unit |
|---|---|---|
| Melt index (190 °C/2.16 kg) | 2.0 | g/10 min |
| Density | 0.920 | g/cm³ |
| Film tensile strength at yield (MD / TD) | 11.0 / 12.0 | MPa |
| Film tensile strength at break (MD / TD) | 35.0 / 30.0 | MPa |
| Film elongation at break (MD / TD) | 800 / 750 | % |
| Dart impact F50 (38 mm dart, 66 cm) | 3.0 | g/µm |
| Tear strength (MD / TD) | 3.25 / 7.5 | g/µm |
| Coefficient of friction (static / kinetic) | 0.23 / 0.16 | |
| Gloss (60°) | 70 | % |
| Recommended processing temperature | 170 – 210 | °C |
Film properties on 40 µm monolayer blown film, 1.8 mm die gap, BUR 2.25 (per TDS). Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is F2002S?
F2002S (OPaL (ONGC Petro additions) F2002S) is a LLDPE (C4) blown film, slip/antiblock produced by OPaL (ONGC Petro additions), in the Linear low-density polyethylene (LLDPE) family.
What are the melt index and density of F2002S?
Melt index (190 °C/2.16 kg): 2.0 g/10 min; density: 0.920 g/cm³.
What is F2002S used for?
F2002S is typically used for: General-purpose packaging film, Blending with LDPE/LLDPE.
Where can I buy F2002S and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies F2002S with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.