PP Moplen EP400M resin
PP impact copolymer, battery cases · LyondellBasell
High low-temperature impact, low warpage, good weld strength. Thien An Plastics supplies Moplen EP400M in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- LyondellBasell (Moplen EP400M)
- Polymer
- PP – Polypropylene
- Type
- PP impact copolymer, battery cases
- Processing
- Injection molding
What is Moplen EP400M?
PP Moplen EP400M from LyondellBasell is a PP impact copolymer, battery cases, melt flow rate (230 °C/2.16 kg): 9 g/10 min; density: 0.9 g/cm³. Moplen EP400M is typically used for: appliances, containers, battery cases. Thien An Plastics (Hanoi, Vietnam) supplies Moplen EP400M in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: Moplen EP400M, EP400M, PP EP400M
Applications
- Appliances
- Containers
- Battery cases
Typical properties – Moplen EP400M
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (230 °C/2.16 kg) | 9 | g/10 min |
| Density | 0.9 | g/cm³ |
| Flexural modulus | 1100 | MPa |
| Tensile strength at yield | 27 | MPa |
| Rockwell hardness (R scale) | 90 |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is Moplen EP400M?
Moplen EP400M (Moplen EP400M) is a PP impact copolymer, battery cases produced by LyondellBasell, in the Polypropylene (PP) family.
What are the melt flow rate and density of Moplen EP400M?
Melt flow rate (230 °C/2.16 kg): 9 g/10 min; Density: 0.9 g/cm³.
What is Moplen EP400M used for?
Moplen EP400M is typically used for: Appliances, Containers, Battery cases.
Where can I buy Moplen EP400M and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies Moplen EP400M with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.