PP Moplen EP300H resin
PP impact copolymer, good cold impact · LyondellBasell
Good cold impact and dimensional stability. Thien An Plastics supplies Moplen EP300H in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- LyondellBasell (Moplen EP300H B)
- Polymer
- PP – Polypropylene
- Type
- PP impact copolymer, good cold impact
- Processing
- Extrusion, injection
What is Moplen EP300H?
PP Moplen EP300H from LyondellBasell is a PP impact copolymer, good cold impact, melt flow rate (230 °C/2.16 kg): 1.8 g/10 min; flexural modulus: 1150 MPa. Moplen EP300H is typically used for: corrugated board, blow molded bottles, injection crates, pails and lids. Thien An Plastics (Hanoi, Vietnam) supplies Moplen EP300H in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: Moplen EP300H B, EP300H, PP EP300H
Applications
- Corrugated board
- Blow molded bottles
- Injection crates, pails and lids
Typical properties – Moplen EP300H
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (230 °C/2.16 kg) | 1.8 | g/10 min |
| Flexural modulus | 1150 | MPa |
| Tensile strength at yield | 25 | MPa |
| Heat deflection temperature (0.45 MPa) | 88 | °C |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is Moplen EP300H?
Moplen EP300H (Moplen EP300H B) is a PP impact copolymer, good cold impact produced by LyondellBasell, in the Polypropylene (PP) family.
What are the melt flow rate and density of Moplen EP300H?
Melt flow rate (230 °C/2.16 kg): 1.8 g/10 min; Flexural modulus: 1150 MPa.
What is Moplen EP300H used for?
Moplen EP300H is typically used for: Corrugated board, Blow molded bottles, Injection crates, pails and lids.
Where can I buy Moplen EP300H and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies Moplen EP300H with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.