
HDPE EMDA-6147 resin
HDPE blow molding for large containers · EQUATE
High molecular weight HDPE copolymer with broad distribution: excellent moldability, toughness and stress-crack resistance, with smooth, printable surfaces (per TDS). Thien An Plastics supplies EMDA-6147 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- EQUATE
- Polymer
- HDPE – High-density polyethylene
- Type
- HDPE blow molding for large containers
- Processing
- Blow molding, pipe extrusion
Indicative price: 17,000 – 60,000 VND/kg (varies by grade, lot and timing – contact us for an exact quote)
What is EMDA-6147?
HDPE EMDA-6147 from EQUATE is a HDPE blow molding for large containers, melt index (190 °C/2.16 kg): 0.07 g/10 min; density: 0.952 g/cm³. EMDA-6147 is typically used for: closed-head containers up to 50 L, fuel tanks and drums, jerry cans for chemicals, paint and inks, non-pressure drainage and sewer pipe. Thien An Plastics (Hanoi, Vietnam) supplies EMDA-6147 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: EMDA6147, EMDA 6147, Equate EMDA-6147, HDPE 6147
Applications
- Closed-head containers up to 50 L
- Fuel tanks and drums
- Jerry cans for chemicals, paint and inks
- Non-pressure drainage and sewer pipe
Typical properties – EMDA-6147
| Property | Value | Unit |
|---|---|---|
| Melt index (190 °C/2.16 kg) | 0.07 | g/10 min |
| High-load melt index (190 °C/21.6 kg) | 9 | g/10 min |
| Density | 0.952 | g/cm³ |
| Vicat softening temperature | 125 | °C |
| Peak melting temperature | 131 | °C |
| Tensile stress at yield | 26 | MPa |
| Tensile strength at break | 35 | MPa |
| Elongation at break | > 750 | % |
| Flexural modulus | 1180 | MPa |
| Notched Izod impact (23 °C, ASTM D256) | 17 | kJ/m² |
| ESCR (100% Igepal, ASTM D1693B) | 1000 | h |
Mechanical properties per ASTM D638 / D790 / D256; ESCR per ASTM D1693 B (100% Igepal, 50 °C). Blow-molding melt temperature about 210 °C (per TDS). Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is EMDA-6147?
EMDA-6147 (EQUATE EMDA-6147) is a HDPE blow molding for large containers produced by EQUATE, in the High-density polyethylene (HDPE) family.
What are the melt index and density of EMDA-6147?
Melt index (190 °C/2.16 kg): 0.07 g/10 min; Density: 0.952 g/cm³.
What is EMDA-6147 used for?
EMDA-6147 is typically used for: Closed-head containers up to 50 L, Fuel tanks and drums, Jerry cans for chemicals, paint and inks, Non-pressure drainage and sewer pipe.
Where can I buy EMDA-6147 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies EMDA-6147 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.