
PP Repol C015EG resin
PP impact copolymer for extrusion and blow molding · Reliance Industries
PP impact copolymer for blow molding and extrusion where high impact strength is needed; excellent processability and rigidity (per TDS). Thien An Plastics supplies Repol C015EG in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- Reliance Industries
- Polymer
- PP – Polypropylene
- Type
- PP impact copolymer for extrusion and blow molding
- Processing
- Sheet extrusion, blow molding, thermoforming
Indicative price: 17,000 – 60,000 VND/kg (varies by grade, lot and timing – contact us for an exact quote)
What is Repol C015EG?
PP Repol C015EG from Reliance Industries is a PP impact copolymer for extrusion and blow molding, melt flow rate (230 °C/2.16 kg): 1.8 g/10 min; density: 0.90 g/cm³. Repol C015EG is typically used for: sheets, blow-molded containers, thermoformed articles, corrugated board, automotive trims. Thien An Plastics (Hanoi, Vietnam) supplies Repol C015EG in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: C015EG, Reliance C015EG, PP C015EG, Repol C 015EG
Applications
- Sheets
- Blow-molded containers
- Thermoformed articles
- Corrugated board
- Automotive trims
Typical properties – Repol C015EG
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (230 °C/2.16 kg) | 1.8 | g/10 min |
| Density | 0.90 | g/cm³ |
| Tensile stress at yield | 27 | MPa |
| Elongation at yield | 11 | % |
| Flexural modulus (1% secant) | 1000 | MPa |
| Notched Izod impact (23 °C, ASTM D256) | 200 | J/m |
| Heat deflection temperature (0.45 MPa) | 95 | °C |
| Hardness, Shore D | 68 |
Mechanical properties per ASTM D638 / D790A / D256 / D648 (455 kPa) on injection-molded specimens per ASTM D4101 (per Reliance TDS). Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is Repol C015EG?
Repol C015EG (Reliance Industries Repol C015EG) is a PP impact copolymer for extrusion and blow molding produced by Reliance Industries, in the Polypropylene (PP) family.
What are the melt index and density of Repol C015EG?
Melt flow rate (230 °C/2.16 kg): 1.8 g/10 min; Density: 0.90 g/cm³.
What is Repol C015EG used for?
Repol C015EG is typically used for: Sheets, Blow-molded containers, Thermoformed articles, Corrugated board, Automotive trims.
Where can I buy Repol C015EG and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies Repol C015EG with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.