HDPE BU5300 resin
HDPE blow molding · Lotte Chemical
Univation gas process; high melt strength, impact and ESCR. Thien An Plastics supplies BU5300 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- Lotte Chemical (Lotte HDPE BU5300)
- Polymer
- HDPE – High-density polyethylene
- Type
- HDPE blow molding
- Processing
- Blow molding
What is BU5300?
HDPE BU5300 from Lotte Chemical is a HDPE blow molding, density: 0.953 g/cm³. BU5300 is typically used for: blow molded products. Thien An Plastics (Hanoi, Vietnam) supplies BU5300 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: Lotte HDPE BU5300, HDPE BU5300, BU 5300
Applications
- Blow molded products
Typical properties – BU5300
| Property | Value | Unit |
|---|---|---|
| Density | 0.953 | g/cm³ |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is BU5300?
BU5300 (Lotte HDPE BU5300) is a HDPE blow molding produced by Lotte Chemical, in the High-density polyethylene (HDPE) family.
What are the melt flow rate and density of BU5300?
Density: 0.953 g/cm³.
What is BU5300 used for?
BU5300 is typically used for: Blow molded products.
Where can I buy BU5300 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies BU5300 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.