PP BJ700 resin
PP impact copolymer, injection · Hanwha TotalEnergies
Easy processing with excellent stiffness and good impact. Thien An Plastics supplies BJ700 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- Hanwha TotalEnergies (Hanwha BJ700)
- Polymer
- PP – Polypropylene
- Type
- PP impact copolymer, injection
- Processing
- Injection molding
What is BJ700?
PP BJ700 from Hanwha TotalEnergies is a PP impact copolymer, injection, melt flow rate (230 °C/2.16 kg): 25 g/10 min; density: 0.91 g/cm³. BJ700 is typically used for: various injection molded parts. Thien An Plastics (Hanoi, Vietnam) supplies BJ700 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: Hanwha BJ700, PP BJ700, BJ 700
Applications
- Various injection molded parts
Typical properties – BJ700
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (230 °C/2.16 kg) | 25 | g/10 min |
| Density | 0.91 | g/cm³ |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is BJ700?
BJ700 (Hanwha BJ700) is a PP impact copolymer, injection produced by Hanwha TotalEnergies, in the Polypropylene (PP) family.
What are the melt flow rate and density of BJ700?
Melt flow rate (230 °C/2.16 kg): 25 g/10 min; Density: 0.91 g/cm³.
What is BJ700 used for?
BJ700 is typically used for: Various injection molded parts.
Where can I buy BJ700 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies BJ700 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.