PP BJ300 resin
PP impact copolymer, injection · Hanwha TotalEnergies
Excellent stiffness-impact balance, high-gloss appearance and easy processing. Thien An Plastics supplies BJ300 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- Hanwha TotalEnergies (Hanwha BJ300)
- Polymer
- PP – Polypropylene
- Type
- PP impact copolymer, injection
- Processing
- Injection molding
What is BJ300?
PP BJ300 from Hanwha TotalEnergies is a PP impact copolymer, injection, melt flow rate (230 °C/2.16 kg): 5 g/10 min; density: 0.91 g/cm³. BJ300 is typically used for: E&E parts, battery cases, containers. Thien An Plastics (Hanoi, Vietnam) supplies BJ300 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: Hanwha BJ300, PP BJ300, BJ 300, Hanwha Total BJ300
Applications
- E&E parts
- Battery cases
- Containers
Typical properties – BJ300
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (230 °C/2.16 kg) | 5 | g/10 min |
| Density | 0.91 | g/cm³ |
| Tensile strength at yield | 290 | kg/cm² |
| Flexural modulus | 13000 | kg/cm² |
| Notched Izod impact (23 °C) | 12 | kg·cm/cm |
| Heat deflection temperature (0.45 MPa) | 110 | °C |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is BJ300?
BJ300 (Hanwha BJ300) is a PP impact copolymer, injection produced by Hanwha TotalEnergies, in the Polypropylene (PP) family.
What are the melt flow rate and density of BJ300?
Melt flow rate (230 °C/2.16 kg): 5 g/10 min; Density: 0.91 g/cm³.
What is BJ300 used for?
BJ300 is typically used for: E&E parts, Battery cases, Containers.
Where can I buy BJ300 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies BJ300 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.