PP B1101 resin
Low-MFI PP homopolymer, blow molding & sheet · IRPC
Low melt flow, general purpose for vacuum and pressure forming. Thien An Plastics supplies B1101 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- IRPC (IRPC Polimaxx B1101)
- Polymer
- PP – Polypropylene
- Type
- Low-MFI PP homopolymer, blow molding & sheet
- Processing
- Extrusion blow molding, sheet extrusion, vacuum forming
What is B1101?
PP B1101 from IRPC is a low-MFI PP homopolymer, blow molding & sheet, melt flow rate (230 °C/2.16 kg): 0.9 g/10 min; density: 0.9 g/cm³. B1101 is typically used for: bottles, meat and food trays, refrigerator parts, sheet, strapping. Thien An Plastics (Hanoi, Vietnam) supplies B1101 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: IRPC Polimaxx B1101, PP B1101, IRPC B1101, B 1101
Applications
- Bottles
- Meat and food trays
- Refrigerator parts
- Sheet
- Strapping
Typical properties – B1101
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (230 °C/2.16 kg) | 0.9 | g/10 min |
| Density | 0.9 | g/cm³ |
| Tensile strength at yield | 37 | MPa |
| Notched Charpy impact (23 °C) | 8.8 | kJ/m² |
| Flexural modulus | 1800 | MPa |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is B1101?
B1101 (IRPC Polimaxx B1101) is a low-MFI PP homopolymer, blow molding & sheet produced by IRPC, in the Polypropylene (PP) family.
What are the melt flow rate and density of B1101?
Melt flow rate (230 °C/2.16 kg): 0.9 g/10 min; Density: 0.9 g/cm³.
What is B1101 used for?
B1101 is typically used for: Bottles, Meat and food trays, Refrigerator parts, Sheet, Strapping.
Where can I buy B1101 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies B1101 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.