
HDPE AS55-003 resin
HDPE blow molding with antistatic additive · ExxonMobil
Blow molding HDPE copolymer with an antistat additive and a good balance of stiffness and stress-crack resistance (per TDS). NSF-51 certified. Thien An Plastics supplies AS55-003 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- ExxonMobil (current name: ExxonMobil™ HD 5403.AS)
- Polymer
- HDPE – High-density polyethylene
- Type
- HDPE blow molding with antistatic additive
- Processing
- Blow molding, thin-gauge sheet thermoforming
Indicative price: 17,000 – 60,000 VND/kg (varies by grade, lot and timing – contact us for an exact quote)
What is AS55-003?
HDPE AS55-003 from ExxonMobil is a HDPE blow molding with antistatic additive, melt index (190 °C/2.16 kg): 0.30 g/10 min; density: 0.954 g/cm³. AS55-003 is typically used for: household and industrial chemical containers, food packaging, pharmaceutical packaging, thin-gauge sheet, thermoformed parts, drainage pipes. Thien An Plastics (Hanoi, Vietnam) supplies AS55-003 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: AS55003, Paxon AS55-003, PAXON AS55003, HD 5403.AS
Applications
- Household and industrial chemical containers
- Food packaging
- Pharmaceutical packaging
- Thin-gauge sheet, thermoformed parts
- Drainage pipes
Typical properties – AS55-003
| Property | Value | Unit |
|---|---|---|
| Melt index (190 °C/2.16 kg) | 0.30 | g/10 min |
| Density | 0.954 | g/cm³ |
| Deflection temperature under load (0.45 MPa) | 71 | °C |
| Vicat softening temperature | 127 | °C |
| Peak melting temperature | 131 | °C |
| Tensile stress at yield | 28 | MPa |
| Flexural modulus (1% secant) | 1000 | MPa |
| ESCR (100% Igepal, ASTM D1693B) | 30 | h |
| Hardness, Shore D (15 s) | 62 | |
| Charpy notched impact strength (-20 °C) | 5.0 | kJ/m² |
| Charpy notched impact strength (23 °C) | 9.0 | kJ/m² |
| Additives | Antistatic |
Molded properties measured on compression-molded plaques (per TDS). Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is AS55-003?
AS55-003 (ExxonMobil AS55-003) is a HDPE blow molding with antistatic additive produced by ExxonMobil, in the High-density polyethylene (HDPE) family.
What are the melt index and density of AS55-003?
Melt index (190 °C/2.16 kg): 0.30 g/10 min; Density: 0.954 g/cm³.
What is AS55-003 used for?
AS55-003 is typically used for: Household and industrial chemical containers, Food packaging, Pharmaceutical packaging, Thin-gauge sheet, thermoformed parts, Drainage pipes.
Where can I buy AS55-003 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies AS55-003 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.