
HIPS 960E resin
HIPS with high ESCR to fats and oils · TotalEnergies
Exceptional resistance to fats and oils (ESCR); used for lids and containers for dressings, gravies and high-fat dairy (per TDS). Thien An Plastics supplies 960E in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- TotalEnergies
- Polymer
- HIPS – High-impact polystyrene
- Type
- HIPS with high ESCR to fats and oils
- Processing
- Sheet extrusion, thermoforming
Indicative price: 17,000 – 60,000 VND/kg (varies by grade, lot and timing – contact us for an exact quote)
What is 960E?
HIPS 960E from TotalEnergies is a HIPS with high ESCR to fats and oils, melt flow rate (200 °C/5 kg): 3.8 g/10 min; density: 1.04 g/cm³. 960E is typically used for: disposables requiring high ESCR, refrigerator liners, capping. Thien An Plastics (Hanoi, Vietnam) supplies 960E in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: Total 960E, TotalEnergies 960E, Polystyrene 960E, HIPS 960E
Applications
- Disposables requiring high ESCR
- Refrigerator liners
- Capping
Typical properties – 960E
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (200 °C/5 kg) | 3.8 | g/10 min |
| Density | 1.04 | g/cm³ |
| Falling dart impact (ASTM D3029) | 12.4 | J |
| Notched Izod impact (ASTM D256) | 160 | J/m |
| Tensile strength (ASTM D638) | 17 | MPa |
| Tensile modulus (ASTM D638) | 1586 | MPa |
| Elongation (ASTM D638) | 70 | % |
| Flexural strength (ASTM D790) | 33 | MPa |
| Flexural modulus (ASTM D790) | 1655 | MPa |
| Heat distortion, annealed (ASTM D648) | 92 | °C |
| Vicat softening (ASTM D1525) | 99 | °C |
| Gloss (60°) | 57 | |
| Linear mold shrinkage (ASTM D955) | 0.4 – 0.7 | % |
The original TDS uses US units (psi, °F, in-lb, ft-lb/in); values above are converted to SI and rounded. FDA 21 CFR 177.1640, UL 94HB (per TDS). Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is 960E?
960E (TotalEnergies 960E) is a HIPS with high ESCR to fats and oils produced by TotalEnergies, in the High impact polystyrene (HIPS) family.
What are the melt index and density of 960E?
Melt flow rate (200 °C/5 kg): 3.8 g/10 min; Density: 1.04 g/cm³.
What is 960E used for?
960E is typically used for: Disposables requiring high ESCR, Refrigerator liners, Capping.
Where can I buy 960E and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies 960E with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.