NHỰA THIÊN ANTHIEN AN PLASTICS Request a quote
HIPS · High-impact polystyrene

HIPS 945E resin

Super-high-impact high-gloss HIPS, ABS replacement · TotalEnergies

Extra toughness without losing mechanical properties; excellent falling-dart impact and high gloss make it an ABS candidate; good deep draw with even sidewalls (per TDS). Thien An Plastics supplies 945E in original bags to manufacturers in Vietnam and for export.

Producer (per TDS)
TotalEnergies
Polymer
HIPS – High-impact polystyrene
Type
Super-high-impact high-gloss HIPS, ABS replacement
Processing
Sheet extrusion, co-extrusion, deep-draw thermoforming

Indicative price: 17,000 – 60,000 VND/kg (varies by grade, lot and timing – contact us for an exact quote)

What is 945E?

HIPS 945E from TotalEnergies is a Super-high-impact high-gloss HIPS, ABS replacement, melt flow rate (200 °C/5 kg): 3.5 g/10 min; density: 1.04 g/cm³. 945E is typically used for: custom sheet extrusion, deep-draw thermoforming, aBS replacement, super-high-gloss impact parts. Thien An Plastics (Hanoi, Vietnam) supplies 945E in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.

Also searched as: Total 945E, TotalEnergies 945E, Polystyrene 945E, HIPS 945E

Applications

Typical properties – 945E

PropertyValueUnit
Melt flow rate (200 °C/5 kg)3.5g/10 min
Density1.04g/cm³
Falling dart impact (ASTM D3029)18.1J
Notched Izod impact (ASTM D256)171J/m
Tensile strength (ASTM D638)24MPa
Tensile modulus (ASTM D638)2068MPa
Elongation (ASTM D638)55%
Flexural strength (ASTM D790)43MPa
Flexural modulus (ASTM D790)2137MPa
Heat distortion, annealed (ASTM D648)91°C
Vicat softening (ASTM D1525)98°C
Gloss (60°)90
Linear mold shrinkage (ASTM D955)0.4 – 0.7%

The original TDS uses US units (psi, °F, in-lb, ft-lb/in); values above are converted to SI and rounded. FDA 21 CFR 177.1640, UL 94HB (per TDS). Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.

FAQ

What type of plastic is 945E?

945E (TotalEnergies 945E) is a Super-high-impact high-gloss HIPS, ABS replacement produced by TotalEnergies, in the High impact polystyrene (HIPS) family.

What are the melt index and density of 945E?

Melt flow rate (200 °C/5 kg): 3.5 g/10 min; Density: 1.04 g/cm³.

What is 945E used for?

945E is typically used for: Custom sheet extrusion, Deep-draw thermoforming, ABS replacement, Super-high-gloss impact parts.

Where can I buy 945E and get its TDS?

Thien An Plastics (Hanoi, Vietnam) supplies 945E with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.

Other HIPS grades

Zalo