NHỰA THIÊN ANTHIEN AN PLASTICS Request a quote
HIPS · High-impact polystyrene

HIPS 940E resin

Super-high-impact high-gloss HIPS for sheet · TotalEnergies

Combines high gloss, toughness and high stiffness for sheet extrusion and thermoforming needing extra toughness (per TDS). Thien An Plastics supplies 940E in original bags to manufacturers in Vietnam and for export.

Producer (per TDS)
TotalEnergies
Polymer
HIPS – High-impact polystyrene
Type
Super-high-impact high-gloss HIPS for sheet
Processing
Sheet extrusion, co-extrusion, injection

Indicative price: 17,000 – 60,000 VND/kg (varies by grade, lot and timing – contact us for an exact quote)

What is 940E?

HIPS 940E from TotalEnergies is a Super-high-impact high-gloss HIPS for sheet, melt flow rate (200 °C/5 kg): 2.8 g/10 min; density: 1.04 g/cm³. 940E is typically used for: cups, food packaging, custom sheet and co-extrusion, appliance and electronics injection parts. Thien An Plastics (Hanoi, Vietnam) supplies 940E in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.

Also searched as: Total 940E, TotalEnergies 940E, Polystyrene 940E, HIPS 940E

Applications

Typical properties – 940E

PropertyValueUnit
Melt flow rate (200 °C/5 kg)2.8g/10 min
Density1.04g/cm³
Falling dart impact (ASTM D3029)18.1J
Notched Izod impact (ASTM D256)160J/m
Tensile strength (ASTM D638)26MPa
Tensile modulus (ASTM D638)2068MPa
Elongation (ASTM D638)50%
Flexural strength (ASTM D790)48MPa
Flexural modulus (ASTM D790)2068MPa
Heat distortion, annealed (ASTM D648)94°C
Vicat softening (ASTM D1525)101°C
Gloss (60°)92
Linear mold shrinkage (ASTM D955)0.4 – 0.7%

The original TDS uses US units (psi, °F, in-lb, ft-lb/in); values above are converted to SI and rounded. FDA 21 CFR 177.1640, UL 94HB (per TDS). Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.

FAQ

What type of plastic is 940E?

940E (TotalEnergies 940E) is a Super-high-impact high-gloss HIPS for sheet produced by TotalEnergies, in the High impact polystyrene (HIPS) family.

What are the melt index and density of 940E?

Melt flow rate (200 °C/5 kg): 2.8 g/10 min; Density: 1.04 g/cm³.

What is 940E used for?

940E is typically used for: Cups, food packaging, Custom sheet and co-extrusion, Appliance and electronics injection parts.

Where can I buy 940E and get its TDS?

Thien An Plastics (Hanoi, Vietnam) supplies 940E with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.

Other HIPS grades

Zalo