NHỰA THIÊN ANTHIEN AN PLASTICS Request a quote
HIPS · High-impact polystyrene

HIPS 844E resin

Matte-finish HIPS for custom sheet · TotalEnergies

Tough, ductile sheet with a rich matte finish; formulated to minimize die build-up (per TDS). Thien An Plastics supplies 844E in original bags to manufacturers in Vietnam and for export.

Producer (per TDS)
TotalEnergies
Polymer
HIPS – High-impact polystyrene
Type
Matte-finish HIPS for custom sheet
Processing
Sheet extrusion, thermoforming

Indicative price: 17,000 – 60,000 VND/kg (varies by grade, lot and timing – contact us for an exact quote)

What is 844E?

HIPS 844E from TotalEnergies is a Matte-finish HIPS for custom sheet, melt flow rate (200 °C/5 kg): 3.0 g/10 min; density: 1.04 g/cm³. 844E is typically used for: printing sheet, thermoforming and deep draw. Thien An Plastics (Hanoi, Vietnam) supplies 844E in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.

Also searched as: Total 844E, TotalEnergies 844E, Polystyrene 844E, HIPS 844E

Applications

Typical properties – 844E

PropertyValueUnit
Melt flow rate (200 °C/5 kg)3.0g/10 min
Density1.04g/cm³
Falling dart impact (ASTM D3029)12.4J
Notched Izod impact (ASTM D256)128J/m
Tensile strength (ASTM D638)22MPa
Tensile modulus (ASTM D638)1931MPa
Elongation (ASTM D638)55%
Flexural strength (ASTM D790)43MPa
Flexural modulus (ASTM D790)1931MPa
Heat distortion, annealed (ASTM D648)93°C
Vicat softening (ASTM D1525)100°C
Gloss (60°)63
Linear mold shrinkage (ASTM D955)0.4 – 0.8%

The original TDS uses US units (psi, °F, in-lb, ft-lb/in); values above are converted to SI and rounded. FDA 21 CFR 177.1640, UL 94HB (per TDS). Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.

FAQ

What type of plastic is 844E?

844E (TotalEnergies 844E) is a Matte-finish HIPS for custom sheet produced by TotalEnergies, in the High impact polystyrene (HIPS) family.

What are the melt index and density of 844E?

Melt flow rate (200 °C/5 kg): 3.0 g/10 min; Density: 1.04 g/cm³.

What is 844E used for?

844E is typically used for: Printing sheet, Thermoforming and deep draw.

Where can I buy 844E and get its TDS?

Thien An Plastics (Hanoi, Vietnam) supplies 844E with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.

Other HIPS grades

Zalo