NHỰA THIÊN ANTHIEN AN PLASTICS Request a quote
HIPS · High-impact polystyrene

HIPS 830 resin

High-flow HIPS for hard-to-fill injection molding · TotalEnergies

High melt flow for large parts, thin walls or molds with complex runners and gates; helps produce stress-free parts (per TDS). Thien An Plastics supplies 830 in original bags to manufacturers in Vietnam and for export.

Producer (per TDS)
TotalEnergies
Polymer
HIPS – High-impact polystyrene
Type
High-flow HIPS for hard-to-fill injection molding
Processing
Injection molding

Indicative price: 17,000 – 60,000 VND/kg (varies by grade, lot and timing – contact us for an exact quote)

What is 830?

HIPS 830 from TotalEnergies is a High-flow HIPS for hard-to-fill injection molding, melt flow rate (200 °C/5 kg): 13.0 g/10 min; density: 1.04 g/cm³. 830 is typically used for: thin-wall injection molding, textile spools, medical applications, color concentrate carrier. Thien An Plastics (Hanoi, Vietnam) supplies 830 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.

Also searched as: Total 830, TotalEnergies 830, Polystyrene 830, HIPS 830

Applications

Typical properties – 830

PropertyValueUnit
Melt flow rate (200 °C/5 kg)13.0g/10 min
Density1.04g/cm³
Falling dart impact (ASTM D3029)13.6J
Notched Izod impact (ASTM D256)112J/m
Tensile strength (ASTM D638)23MPa
Tensile modulus (ASTM D638)2206MPa
Elongation (ASTM D638)45%
Flexural strength (ASTM D790)39MPa
Flexural modulus (ASTM D790)2068MPa
Heat distortion, annealed (ASTM D648)87°C
Vicat softening (ASTM D1525)93°C
Gloss (60°)94
Linear mold shrinkage (ASTM D955)0.4 – 0.7%

The original TDS uses US units (psi, °F, in-lb, ft-lb/in); values above are converted to SI and rounded. FDA 21 CFR 177.1640, UL 94HB (per TDS). Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.

FAQ

What type of plastic is 830?

830 (TotalEnergies 830) is a High-flow HIPS for hard-to-fill injection molding produced by TotalEnergies, in the High impact polystyrene (HIPS) family.

What are the melt index and density of 830?

Melt flow rate (200 °C/5 kg): 13.0 g/10 min; Density: 1.04 g/cm³.

What is 830 used for?

830 is typically used for: Thin-wall injection molding, Textile spools, Medical applications, Color concentrate carrier.

Where can I buy 830 and get its TDS?

Thien An Plastics (Hanoi, Vietnam) supplies 830 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.

Other HIPS grades

Zalo