NHỰA THIÊN ANTHIEN AN PLASTICS Request a quote
HIPS · High-impact polystyrene

HIPS 825E resin

HIPS for sheet extrusion and deep-draw thermoforming · TotalEnergies

Industry-standard extrusion HIPS with balanced properties and processing; suited to deep-draw thermoforming and multilayer sheet (per TDS). Thien An Plastics supplies 825E in original bags to manufacturers in Vietnam and for export.

Producer (per TDS)
TotalEnergies
Polymer
HIPS – High-impact polystyrene
Type
HIPS for sheet extrusion and deep-draw thermoforming
Processing
Sheet extrusion, thermoforming

Indicative price: 17,000 – 60,000 VND/kg (varies by grade, lot and timing – contact us for an exact quote)

What is 825E?

HIPS 825E from TotalEnergies is a HIPS for sheet extrusion and deep-draw thermoforming, melt flow rate (200 °C/5 kg): 3.0 g/10 min; density: 1.04 g/cm³. 825E is typically used for: custom sheet extrusion, extrusion thermoforming, packaging, form-fill-seal. Thien An Plastics (Hanoi, Vietnam) supplies 825E in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.

Also searched as: Total 825E, TotalEnergies 825E, Polystyrene 825E, HIPS 825E

Applications

Typical properties – 825E

PropertyValueUnit
Melt flow rate (200 °C/5 kg)3.0g/10 min
Density1.04g/cm³
Falling dart impact (ASTM D3029)12.4J
Notched Izod impact (ASTM D256)123J/m
Tensile strength (ASTM D638)25MPa
Tensile modulus (ASTM D638)2068MPa
Elongation (ASTM D638)50%
Flexural strength (ASTM D790)48MPa
Flexural modulus (ASTM D790)2206MPa
Heat distortion, annealed (ASTM D648)94°C
Vicat softening (ASTM D1525)102°C
Gloss (60°)70
Linear mold shrinkage (ASTM D955)0.4 – 0.7%

The original TDS uses US units (psi, °F, in-lb, ft-lb/in); values above are converted to SI and rounded. FDA 21 CFR 177.1640, UL 94HB (per TDS). Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.

FAQ

What type of plastic is 825E?

825E (TotalEnergies 825E) is a HIPS for sheet extrusion and deep-draw thermoforming produced by TotalEnergies, in the High impact polystyrene (HIPS) family.

What are the melt index and density of 825E?

Melt flow rate (200 °C/5 kg): 3.0 g/10 min; Density: 1.04 g/cm³.

What is 825E used for?

825E is typically used for: Custom sheet extrusion, Extrusion thermoforming, Packaging, Form-fill-seal.

Where can I buy 825E and get its TDS?

Thien An Plastics (Hanoi, Vietnam) supplies 825E with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.

Other HIPS grades

Zalo