
HIPS 825 resin
Easy-processing high-gloss HIPS for injection molding · TotalEnergies
Fast cycles with minimal post stress for outstanding impact retention; controlled rubber particle size for high gloss (per TDS). Thien An Plastics supplies 825 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- TotalEnergies
- Polymer
- HIPS – High-impact polystyrene
- Type
- Easy-processing high-gloss HIPS for injection molding
- Processing
- Injection molding
Indicative price: 17,000 – 60,000 VND/kg (varies by grade, lot and timing – contact us for an exact quote)
What is 825?
HIPS 825 from TotalEnergies is a Easy-processing high-gloss HIPS for injection molding, melt flow rate (200 °C/5 kg): 8.0 g/10 min; density: 1.04 g/cm³. 825 is typically used for: appliance housings, housewares and toys, structural foam, refrigeration parts. Thien An Plastics (Hanoi, Vietnam) supplies 825 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: Total 825, TotalEnergies 825, Polystyrene 825, HIPS 825
Applications
- Appliance housings
- Housewares and toys
- Structural foam
- Refrigeration parts
Typical properties – 825
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (200 °C/5 kg) | 8.0 | g/10 min |
| Density | 1.04 | g/cm³ |
| Falling dart impact (ASTM D3029) | 12.4 | J |
| Notched Izod impact (ASTM D256) | 107 | J/m |
| Tensile strength (ASTM D638) | 25 | MPa |
| Tensile modulus (ASTM D638) | 2275 | MPa |
| Elongation (ASTM D638) | 45 | % |
| Flexural strength (ASTM D790) | 45 | MPa |
| Flexural modulus (ASTM D790) | 2344 | MPa |
| Heat distortion, annealed (ASTM D648) | 89 | °C |
| Vicat softening (ASTM D1525) | 96 | °C |
| Gloss (60°) | 90 | |
| Linear mold shrinkage (ASTM D955) | 0.4 – 0.7 | % |
The original TDS uses US units (psi, °F, in-lb, ft-lb/in); values above are converted to SI and rounded. FDA 21 CFR 177.1640, UL 94HB (per TDS). Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is 825?
825 (TotalEnergies 825) is a Easy-processing high-gloss HIPS for injection molding produced by TotalEnergies, in the High impact polystyrene (HIPS) family.
What are the melt index and density of 825?
Melt flow rate (200 °C/5 kg): 8.0 g/10 min; Density: 1.04 g/cm³.
What is 825 used for?
825 is typically used for: Appliance housings, Housewares and toys, Structural foam, Refrigeration parts.
Where can I buy 825 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies 825 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.