NHỰA THIÊN ANTHIEN AN PLASTICS Request a quote
HIPS · High-impact polystyrene

HIPS 740 resin

High-gloss, high-stiffness HIPS for extrusion and injection · TotalEnergies

Suited to extrusion thermoforming needing high gloss and stiffness, thin walls and high-speed forming (per TDS). Thien An Plastics supplies 740 in original bags to manufacturers in Vietnam and for export.

Producer (per TDS)
TotalEnergies
Polymer
HIPS – High-impact polystyrene
Type
High-gloss, high-stiffness HIPS for extrusion and injection
Processing
Sheet extrusion / thermoforming, injection molding

Indicative price: 17,000 – 60,000 VND/kg (varies by grade, lot and timing – contact us for an exact quote)

What is 740?

HIPS 740 from TotalEnergies is a High-gloss, high-stiffness HIPS for extrusion and injection, melt flow rate (200 °C/5 kg): 4.0 g/10 min; density: 1.04 g/cm³. 740 is typically used for: food-service lids, cups and portion containers, high-gloss injection parts, small appliances and electronics. Thien An Plastics (Hanoi, Vietnam) supplies 740 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.

Also searched as: Total 740, TotalEnergies 740, Polystyrene 740, HIPS 740

Applications

Typical properties – 740

PropertyValueUnit
Melt flow rate (200 °C/5 kg)4.0g/10 min
Density1.04g/cm³
Falling dart impact (ASTM D3029)13.6J
Notched Izod impact (ASTM D256)107J/m
Tensile strength (ASTM D638)30MPa
Tensile modulus (ASTM D638)2344MPa
Elongation (ASTM D638)45%
Flexural strength (ASTM D790)55MPa
Flexural modulus (ASTM D790)2551MPa
Heat distortion, annealed (ASTM D648)94°C
Vicat softening (ASTM D1525)101°C
Gloss (60°)92
Linear mold shrinkage (ASTM D955)0.4 – 0.7%

The original TDS uses US units (psi, °F, in-lb, ft-lb/in); values above are converted to SI and rounded. FDA 21 CFR 177.1640, UL 94HB (per TDS). Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.

FAQ

What type of plastic is 740?

740 (TotalEnergies 740) is a High-gloss, high-stiffness HIPS for extrusion and injection produced by TotalEnergies, in the High impact polystyrene (HIPS) family.

What are the melt index and density of 740?

Melt flow rate (200 °C/5 kg): 4.0 g/10 min; Density: 1.04 g/cm³.

What is 740 used for?

740 is typically used for: Food-service lids, cups and portion containers, High-gloss injection parts, Small appliances and electronics.

Where can I buy 740 and get its TDS?

Thien An Plastics (Hanoi, Vietnam) supplies 740 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.

Other HIPS grades

Zalo