NHỰA THIÊN ANTHIEN AN PLASTICS Request a quote
GPPS · General-purpose polystyrene

GPPS 525B resin

Crystal GPPS for injection and co-extrusion capping · TotalEnergies

Molds with minimal stress and fast cycles; for medical and laboratory parts, tumblers and jewel boxes (per TDS). Thien An Plastics supplies 525B in original bags to manufacturers in Vietnam and for export.

Producer (per TDS)
TotalEnergies
Polymer
GPPS – General-purpose polystyrene
Type
Crystal GPPS for injection and co-extrusion capping
Processing
Injection molding, co-extrusion

Indicative price: 17,000 – 60,000 VND/kg (varies by grade, lot and timing – contact us for an exact quote)

What is 525B?

GPPS 525B from TotalEnergies is a Crystal GPPS for injection and co-extrusion capping, melt flow rate (200 °C/5 kg): 9.0 g/10 min; density: 1.04 g/cm³. 525B is typically used for: cutlery, co-extrusion capping, medical applications. Thien An Plastics (Hanoi, Vietnam) supplies 525B in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.

Also searched as: Total 525B, TotalEnergies 525B, Polystyrene 525B, GPPS 525B

Applications

Typical properties – 525B

PropertyValueUnit
Melt flow rate (200 °C/5 kg)9.0g/10 min
Density1.04g/cm³
Tensile strength (ASTM D638)46MPa
Tensile modulus (ASTM D638)3034MPa
Flexural strength (ASTM D790)93MPa
Flexural modulus (ASTM D790)3103MPa
Heat distortion, annealed (ASTM D648)93°C
Vicat softening (ASTM D1525)101°C
Linear mold shrinkage (ASTM D955)0.4 – 0.7%

The original TDS uses US units (psi, °F, in-lb, ft-lb/in); values above are converted to SI and rounded. FDA 21 CFR 177.1640, UL 94HB (per TDS). Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.

FAQ

What type of plastic is 525B?

525B (TotalEnergies 525B) is a Crystal GPPS for injection and co-extrusion capping produced by TotalEnergies, in the General purpose polystyrene (GPPS) family.

What are the melt index and density of 525B?

Melt flow rate (200 °C/5 kg): 9.0 g/10 min; Density: 1.04 g/cm³.

What is 525B used for?

525B is typically used for: Cutlery, Co-extrusion capping, Medical applications.

Where can I buy 525B and get its TDS?

Thien An Plastics (Hanoi, Vietnam) supplies 525B with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.

Other GPPS grades

Zalo