
GPPS 523W resin
High-flow, high-heat crystal GPPS for foam · TotalEnergies
Very narrow molecular weight distribution with excellent performance in extruded loose-fill foam (per TDS). Thien An Plastics supplies 523W in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- TotalEnergies
- Polymer
- GPPS – General-purpose polystyrene
- Type
- High-flow, high-heat crystal GPPS for foam
- Processing
- Foam extrusion
Indicative price: 17,000 – 60,000 VND/kg (varies by grade, lot and timing – contact us for an exact quote)
What is 523W?
GPPS 523W from TotalEnergies is a High-flow, high-heat crystal GPPS for foam, melt flow rate (200 °C/5 kg): 11.0 g/10 min; density: 1.04 g/cm³. 523W is typically used for: loose-fill packaging, foam board, insulation board. Thien An Plastics (Hanoi, Vietnam) supplies 523W in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: Total 523W, TotalEnergies 523W, Polystyrene 523W, GPPS 523W
Applications
- Loose-fill packaging
- Foam board
- Insulation board
Typical properties – 523W
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (200 °C/5 kg) | 11.0 | g/10 min |
| Density | 1.04 | g/cm³ |
| Tensile strength (ASTM D638) | 45 | MPa |
| Tensile modulus (ASTM D638) | 3034 | MPa |
| Flexural strength (ASTM D790) | 82 | MPa |
| Flexural modulus (ASTM D790) | 3310 | MPa |
| Heat distortion, annealed (ASTM D648) | 96 | °C |
| Vicat softening (ASTM D1525) | 106 | °C |
| Linear mold shrinkage (ASTM D955) | 0.4 – 0.7 | % |
The original TDS uses US units (psi, °F, in-lb, ft-lb/in); values above are converted to SI and rounded. FDA 21 CFR 177.1640, UL 94HB (per TDS). Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is 523W?
523W (TotalEnergies 523W) is a High-flow, high-heat crystal GPPS for foam produced by TotalEnergies, in the General purpose polystyrene (GPPS) family.
What are the melt index and density of 523W?
Melt flow rate (200 °C/5 kg): 11.0 g/10 min; Density: 1.04 g/cm³.
What is 523W used for?
523W is typically used for: Loose-fill packaging, Foam board, Insulation board.
Where can I buy 523W and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies 523W with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.