NHỰA THIÊN ANTHIEN AN PLASTICS Request a quote
GPPS · General-purpose polystyrene

GPPS 500W resin

High-flow crystal GPPS for high-speed injection · TotalEnergies

High flow fills thin-wall parts easily; excellent clarity and strength with a neutral water-white tint (per TDS). Thien An Plastics supplies 500W in original bags to manufacturers in Vietnam and for export.

Producer (per TDS)
TotalEnergies
Polymer
GPPS – General-purpose polystyrene
Type
High-flow crystal GPPS for high-speed injection
Processing
Injection molding

Indicative price: 17,000 – 60,000 VND/kg (varies by grade, lot and timing – contact us for an exact quote)

What is 500W?

GPPS 500W from TotalEnergies is a High-flow crystal GPPS for high-speed injection, melt flow rate (200 °C/5 kg): 14 g/10 min; density: 1.04 g/cm³. 500W is typically used for: cutlery, tumblers and containers, gloss capping, blending crystal, masterbatch carrier. Thien An Plastics (Hanoi, Vietnam) supplies 500W in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.

Also searched as: Total 500W, TotalEnergies 500W, Polystyrene 500W, GPPS 500W

Applications

Typical properties – 500W

PropertyValueUnit
Melt flow rate (200 °C/5 kg)14g/10 min
Density1.04g/cm³
Tensile strength (ASTM D638)44MPa
Tensile modulus (ASTM D638)3103MPa
Flexural strength (ASTM D790)84MPa
Flexural modulus (ASTM D790)3172MPa
Heat distortion, annealed (ASTM D648)91°C
Vicat softening (ASTM D1525)97°C
Linear mold shrinkage (ASTM D955)0.4 – 0.7%

The original TDS uses US units (psi, °F, in-lb, ft-lb/in); values above are converted to SI and rounded. FDA 21 CFR 177.1640, UL 94HB (per TDS). Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.

FAQ

What type of plastic is 500W?

500W (TotalEnergies 500W) is a High-flow crystal GPPS for high-speed injection produced by TotalEnergies, in the General purpose polystyrene (GPPS) family.

What are the melt index and density of 500W?

Melt flow rate (200 °C/5 kg): 14 g/10 min; Density: 1.04 g/cm³.

What is 500W used for?

500W is typically used for: Cutlery, tumblers and containers, Gloss capping, Blending crystal, Masterbatch carrier.

Where can I buy 500W and get its TDS?

Thien An Plastics (Hanoi, Vietnam) supplies 500W with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.

Other GPPS grades

Zalo