SAN SAN 576 resin
Medium-flow SAN · SABIC
Medium-flow SAN pellets; FDA compliant (room temperature or below). Thien An Plastics supplies SAN 576 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- SABIC (SABIC SAN 576)
- Polymer
- SAN – Styrene-acrylonitrile
- Type
- Medium-flow SAN
- Processing
- Injection molding
What is SAN 576?
SAN SAN 576 from SABIC is a medium-flow SAN, melt flow rate (220 °C/10 kg): 78 g/10 min; density: 1.08 g/cm³. SAN 576 is typically used for: SAN molded parts. Thien An Plastics (Hanoi, Vietnam) supplies SAN 576 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: SABIC SAN 576, SAN576, INP576 SAN, SAN 576
Applications
- SAN molded parts
Typical properties – SAN 576
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (220 °C/10 kg) | 78 | g/10 min |
| Density | 1.08 | g/cm³ |
| Tensile strength at yield | 41 | MPa |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is SAN 576?
SAN 576 (SABIC SAN 576) is a medium-flow SAN produced by SABIC, in the Styrene-acrylonitrile (SAN) family.
What are the melt flow rate and density of SAN 576?
Melt flow rate (220 °C/10 kg): 78 g/10 min; Density: 1.08 g/cm³.
What is SAN 576 used for?
SAN 576 is typically used for: SAN molded parts.
Where can I buy SAN 576 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies SAN 576 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.