ABS Cycolac MG47F resin
General-purpose injection ABS · SABIC
Balanced engineering properties; FDA compliant. Thien An Plastics supplies Cycolac MG47F in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- SABIC (SABIC ABS MG47F)
- Polymer
- ABS – ABS resin
- Type
- General-purpose injection ABS
- Processing
- Injection molding
What is Cycolac MG47F?
ABS Cycolac MG47F from SABIC is a general-purpose injection ABS, melt flow rate (220 °C/10 kg): 18 g/10 min; density: 1.04 g/cm³. Cycolac MG47F is typically used for: automotive exterior parts, electronic displays, lawn & garden equipment, lighting, electrical/electronic, 3D printing. Thien An Plastics (Hanoi, Vietnam) supplies Cycolac MG47F in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: SABIC ABS MG47F, MG47F, ABS MG47F
Applications
- Automotive exterior parts
- Electronic displays
- Lawn & garden equipment
- Lighting
- Electrical/electronic
- 3D printing
Typical properties – Cycolac MG47F
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (220 °C/10 kg) | 18 | g/10 min |
| Density | 1.04 | g/cm³ |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is Cycolac MG47F?
Cycolac MG47F (SABIC ABS MG47F) is a general-purpose injection ABS produced by SABIC, in the ABS resin (ABS) family.
What are the melt flow rate and density of Cycolac MG47F?
Melt flow rate (220 °C/10 kg): 18 g/10 min; Density: 1.04 g/cm³.
What is Cycolac MG47F used for?
Cycolac MG47F is typically used for: Automotive exterior parts, Electronic displays, Lawn & garden equipment, Lighting, Electrical/electronic, 3D printing.
Where can I buy Cycolac MG47F and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies Cycolac MG47F with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.