LDPE · Low-density polyethylene
LDPE L705 resin
LDPE extrusion coating · Sumitomo
Recommended extrusion temperature 280–340 °C. Thien An Plastics supplies L705 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- Sumitomo (Sumikathene L705)
- Polymer
- LDPE – Low-density polyethylene
- Type
- LDPE extrusion coating
- Processing
- Extrusion coating
Applications
- Coating on OPA/OPP film
- Kraft paper coating
- Aluminium foil coating
Typical properties – L705
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (190 °C/2.16 kg) | 7 | g/10 min |
| Density | 0.919 | g/cm³ |
| Vicat softening point | 86 | °C |
| Melting point | 106 | °C |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is L705?
L705 (Sumikathene L705) is a ldpe extrusion coating produced by Sumitomo, in the Low-density polyethylene (LDPE) family.
What are the melt flow rate and density of L705?
Melt flow rate (190 °C/2.16 kg): 7 g/10 min; Density: 0.919 g/cm³.
What is L705 used for?
L705 is typically used for: Coating on OPA/OPP film, Kraft paper coating, Aluminium foil coating.
Where can I buy L705 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies L705 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.