HDPE · High-density polyethylene
HDPE HHM5502LW resin
HDPE blow molding · Sinopec
Good rigidity and stress-crack resistance. Thien An Plastics supplies HHM5502LW in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- Sinopec (HDPE HHM5502LW)
- Polymer
- HDPE – High-density polyethylene
- Type
- HDPE blow molding
- Processing
- Blow molding
Applications
- Small and medium hollow bottles
- Detergent bottles
Typical properties – HHM5502LW
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (190 °C/2.16 kg) | 0.34 | g/10 min |
| Density | 0.955 | g/cm³ |
| Tensile strength at yield | 30.1 | MPa |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is HHM5502LW?
HHM5502LW (HDPE HHM5502LW) is a hdpe blow molding produced by Sinopec, in the High-density polyethylene (HDPE) family.
What are the melt flow rate and density of HHM5502LW?
Melt flow rate (190 °C/2.16 kg): 0.34 g/10 min; Density: 0.955 g/cm³.
What is HHM5502LW used for?
HHM5502LW is typically used for: Small and medium hollow bottles, Detergent bottles.
Where can I buy HHM5502LW and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies HHM5502LW with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.