HDPE · High-density polyethylene
HDPE HD60462 LB resin
HDPE large-part blow molding, UV · Sibur
High-MW hexene copolymer with high ESCR and melt strength. Thien An Plastics supplies HD60462 LB in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- Sibur (PE HD60462 LB)
- Polymer
- HDPE – High-density polyethylene
- Type
- HDPE large-part blow molding, UV
- Processing
- Blow molding
Applications
- IBC containers
- Large tanks up to 5,000 L
Typical properties – HD60462 LB
| Property | Value | Unit |
|---|---|---|
| High-load melt index (190 °C/21.6 kg) | 6 | g/10 min |
| Density | 0.946 | g/cm³ |
| Flexural modulus | 900 | MPa |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is HD60462 LB?
HD60462 LB (PE HD60462 LB) is a hdpe large-part blow molding, uv produced by Sibur, in the High-density polyethylene (HDPE) family.
What are the melt flow rate and density of HD60462 LB?
High-load melt index (190 °C/21.6 kg): 6 g/10 min; Density: 0.946 g/cm³.
What is HD60462 LB used for?
HD60462 LB is typically used for: IBC containers, Large tanks up to 5,000 L.
Where can I buy HD60462 LB and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies HD60462 LB with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.