HDPE · High-density polyethylene
HDPE HD03550 GM resin
Bimodal HDPE, blow molding · Sibur
Bimodal ethylene/hexene-1 copolymer. Thien An Plastics supplies HD03550 GM in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- Sibur (PE HD03550 GM)
- Polymer
- HDPE – High-density polyethylene
- Type
- Bimodal HDPE, blow molding
- Processing
- Blow molding, Extrusion
Applications
- Bottles and cans up to 5 L
- Non-pressure technical pipes
Typical properties – HD03550 GM
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (190 °C/2.16 kg) | 0.3 | g/10 min |
| Density | 0.956 | g/cm³ |
| Tensile strength at yield | 27 | MPa |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is HD03550 GM?
HD03550 GM (PE HD03550 GM) is a bimodal hdpe, blow molding produced by Sibur, in the High-density polyethylene (HDPE) family.
What are the melt flow rate and density of HD03550 GM?
Melt flow rate (190 °C/2.16 kg): 0.3 g/10 min; Density: 0.956 g/cm³.
What is HD03550 GM used for?
HD03550 GM is typically used for: Bottles and cans up to 5 L, Non-pressure technical pipes.
Where can I buy HD03550 GM and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies HD03550 GM with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.