MDPE YUCLAIR DX900 resin
PE-RT (octene) hot & cold water pipe · SK Geo Centric
Substitutes XLPE; long-term hydrostatic strength, glossy pipe surface, good Cl⁻ resistance; classified PE-RT. Thien An Plastics supplies YUCLAIR DX900 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- SK Geo Centric (YUCLAIR DX900)
- Polymer
- MDPE – Medium-density polyethylene
- Type
- PE-RT (octene) hot & cold water pipe
- Processing
- Pipe extrusion
What is YUCLAIR DX900?
MDPE YUCLAIR DX900 from SK Geo Centric is a PE-RT (octene) hot & cold water pipe, melt index (190 °C/2.16 kg): 0.61 g/10 min; density: 0.936 g/cm³. YUCLAIR DX900 is typically used for: hot & cold water supply pipe. Thien An Plastics (Hanoi, Vietnam) supplies YUCLAIR DX900 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: YUCLAIR DX900, DX900, PE-RT DX900, PERT DX900
Applications
- Hot & cold water supply pipe
Typical properties – YUCLAIR DX900
| Property | Value | Unit |
|---|---|---|
| Melt index (190 °C/2.16 kg) | 0.61 | g/10 min |
| Density | 0.936 | g/cm³ |
| Environmental stress crack resistance (ESCR) | >10000 | h |
| Vicat softening point | 123 | °C |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is YUCLAIR DX900?
YUCLAIR DX900 (YUCLAIR DX900) is a PE-RT (octene) hot & cold water pipe produced by SK Geo Centric, in the Medium-density polyethylene (MDPE) family.
What are the melt flow rate and density of YUCLAIR DX900?
Melt index (190 °C/2.16 kg): 0.61 g/10 min; Density: 0.936 g/cm³.
What is YUCLAIR DX900 used for?
YUCLAIR DX900 is typically used for: Hot & cold water supply pipe.
Where can I buy YUCLAIR DX900 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies YUCLAIR DX900 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.