PMMA ACRYREX CM-207 resin
Medium-viscosity PMMA (acrylic) · Chi Mei
Medium-viscosity PMMA. Thien An Plastics supplies ACRYREX CM-207 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- Chi Mei (Chimei PMMA CM-207)
- Polymer
- PMMA – Polymethyl methacrylate (acrylic)
- Type
- Medium-viscosity PMMA (acrylic)
- Processing
- Injection molding
What is ACRYREX CM-207?
PMMA ACRYREX CM-207 from Chi Mei is a medium-viscosity PMMA (acrylic), melt volume rate (230 °C/3.8 kg): 8.5 cm³/10 min; density: 1.19 g/cm³. ACRYREX CM-207 is typically used for: acrylic molded parts. Thien An Plastics (Hanoi, Vietnam) supplies ACRYREX CM-207 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: Chimei PMMA CM-207, CM207, CM-207, PMMA CM207, Acrylic CM-207
Applications
- Acrylic molded parts
Typical properties – ACRYREX CM-207
| Property | Value | Unit |
|---|---|---|
| Melt volume rate (230 °C/3.8 kg) | 8.5 | cm³/10 min |
| Density | 1.19 | g/cm³ |
| Tensile strength at yield | 67 | MPa |
| Notched Charpy impact (23 °C) | 2 | kJ/m² |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is ACRYREX CM-207?
ACRYREX CM-207 (Chimei PMMA CM-207) is a medium-viscosity PMMA (acrylic) produced by Chi Mei, in the Polymethyl methacrylate (PMMA) family.
What are the melt flow rate and density of ACRYREX CM-207?
Melt volume rate (230 °C/3.8 kg): 8.5 cm³/10 min; Density: 1.19 g/cm³.
What is ACRYREX CM-207 used for?
ACRYREX CM-207 is typically used for: Acrylic molded parts.
Where can I buy ACRYREX CM-207 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies ACRYREX CM-207 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.